| Subject | Text |
| phihips tubes | Thanks Steve I looked into the tubes the red one looks alot clearer than the blue and green you can |
| philips tubes | Hello I was told I need my green&blue tubes filled on my philips 7p033w102 could someone tell me |
|
|
| green & blue tubes numbers | mag. 55p8288 green & blue tubes numbers |
| philips tubes | I looked into the lenses not the tubes |
| Antique Electronics Supply in Tempe AZ US. I believe buys tubes, depending on what they want and mus |
| Hi there.
The tubes are a nightmare to get hold of, but you can measure them and buy ones of simi |
| Well, it's a rear projection TV, and since none of the 3 tubes are lit, I'm guessing the problem lie |
| MITSUBIBHI SHUTDOWN | HELLO. Well KIKI the first thing that comes to mind is even though the tubes were replaced there had |
| Re: Failing CRT symptoms | [quote:db3d688dc3="jb38"]It can manifest itself in various ways, but the most common is for the pict |
| Some Tests to Try... | I, too, would suspect one or more faulty capacitors, especially if they're the old types with a wax |
| thanks for you guys quick responds! ( cogil & minnie )
minnie, how do I check the fluid leaka |
| Well, any high voltage capacitors could give a nasty shock if fully charged, they can be discharged |
| [quote:07fc547938="gary"]that is the battery, if it is 2 sections in 1 tube it is a 2.4v nicad batte |
| Do you still have high voltage on the tube? (static sound when turning on/off the screen)
And are |
| Re: Function of inverter on lcd display | Hi,
The purpose of an inverter is to convert the DC power supply to AC to power the LCD back ligh |
| Are the tubes lit? |
| Mitsubishi VS-60703 Blue screen no audio or OSD | Does anyone have any idea what might cause this problem? When first turned on after being off for s |
|
|
| Same part number for both red tubes? |
| I think I'm almost there... | Thanks again for your response.
For the heck of it I reconnected the two boards that share the bl |
| convergence estimate | Hi, what`s he doing for $449.00? If he`s just changing the STK`s
Then I would say you are getting |
| I have the 8800F and mines a flat three pin type affair, above the socket it's marked 32V.
I woul |
| Toshiba help please! blinking light | I have a toshiba TP50F50/TP50F51 which has a red light on the front that just blinks. When you plug |
| Sony KP-41S4 projection tv with convergence problem | The former owner replaced the picture tubes, introducing a convergence error for red and blue. After |
| You come out of the blue.
You need to start witht the basics. "What was the tv doing before sh |
| old mitsubishi color problems | I have an old mitsubishi vs-410R, and the colors seem like they are un-aligned, with the blue green |
| Blue raster with flyback lines. | Yes it's the CRT. Leak on one of the guns is a common fault on wide screen Philips tubes (LG-Philips |
| 5 flashes on this set is an auto grey scale error, check setting of a1 control, tubes seem to be fai |
| Oh dear... never ever use magnets, you've probably made the fault worse or masqueraded the original |
| 21fjp22 or 21 fbp22 | Hi,
I have a few american vintage roundies and I am in desperate need of crt's.
Would somebody k |
| Sorry Minnie but the part number you gave is not the right part number.
RDENC2548TPZZ is the inv |